There are multiple settings available when it comes to configuring a range extender on the network. Out of all these, some fundamental settings are a must to ensure the proper functioning of the extender. We are going to shed light on these basic settings in our post. You must pay close attention to every step.
Some standard values are used and pre-defined in the radio settings of the router. Apart from this, different protocols and modes are available for wi-fi. You can use an 802.11g router instead of 802.11b for improving the performance and speed of range extender.
The channel number of an extender is just a frequency band that it uses for communication with other devices. The available channel numbers are 1 to 11. By default, these routers are set to 1, 6 and 11. But if you want you can change to avoid any interference.
All the extenders have their SSID which is used to connect the wireless devices to it. You can change the default SSID and password if more than one router or extender is configured at the same place.
Connection settings for routers
When you buy an extender, it comes with pre-defined settings that can help to connect to the home network.
Connection type
As the name implies, the connection type for different types of modems and internet service is different. All the routers have their connection type and administrator details to log in to.
The name of the connection type is based on the topology used. Otherwise, the most common ones are Static IP, PPoE, IP, PPTP, and L2TP.
Internet username and password
When you take services from any internet service provider, they allocate the username and password to the customers through which they can log in to the internet settings. Similarly, the router manufacturers also provide the login details to the user for changing the settings of the router.
Security settings for home Netgear extender
Change the SSID’s password immediately after configuring the extender. It will help to protect the network from being used by unauthorized persons. No hacker can access the network if he doesn’t know the login password. If you keep the default username and password then that can be easily guessed through the device manufacturer website.
From the ‘Wireless settings’ go-to ‘Security mode’ and click on ‘Wi-fi key’. Here you need to select the Authentication type depending on the options available. The security modes are different for different models of the range extender. The best and most recommend security mode is WEP-PSK and the basic one is WPA.
This is all about the basic settings of your range extender that are must understand and configure on it. We hope you have understood all the points and must try on your own. In case you are getting a problem in using the basic settings or want to know more about the extender setup, then contact the Netgear experts available at mywifiext fix. The team of experts is quick and dedicated to solving the problems of customers in the first go.