Month: May 2020

Can A Wireless Extender Help Reach Wireless Signals In Every Corner Of Your House?

The wireless router that comes with your internet service may not cover every corner of your house due to its limited range or connectivity. Almost in every house, there are dead spots where the Wi-Fi signal is approximately negligible or available with limited speed.

The placement of the router at the same time can’t be sidelined. Thus, if there are several walls or doors located in-between the router and the device, then the signal may not reach properly. If you move away from your router, the signal will continue to drop.

The router must be located in the center of your home but this is ideally not the case. If you have placed the router in some cabinet or closed surface, then take it out from there and place it in open.

If the Wi-Fi router is built into the internet service provider provided modem, then you can look for the wireless extender option, which creates additional Apps to help to reach the signal in every corner of the house.

Let’s discuss internet speeds. Don’t mix up slow wireless with a slow network plan.

What you are paying to the internet service provider is for getting the data at different speeds like if you opt for a 24 Mbps plan, then you will get a speed of 24 megabits per second. Likewise if you opt for 1000 Mbps, then you will get more speed at extra cost. You can’t get speeds faster than the one offered by ISP. If you are using the internet and your kids are playing games online, then the slow internet speed issue may encounter.

If you have subscribed for a high-speed internet pack and still getting the low signal, then you might be accessing the internet from an area with weak Wi-Fi coverage.

A range extender is a small device that plugs into the power outlet and extends the range of the internet in a particular area of your residence. It is recommended to use the same brand of the extender as your router. Check out more information on how to setup Wifi Extender to ensure strong and uninterrupted signals across the house.

There are several extenders available under $40 which can well enhance the range of the network. However, some of these can’t send or receive the signal at the same time. So, extenders work where internet access is limited or the price of the plan is low.

In best extenders, you will find multiple bands and radio frequencies to send and receive the signal simultaneously which can be better but not perfect. Some extenders even cost more than $100. You can consider the popular brands like Netgear, Linksys, Eero or Google for mesh Wi-Fi systems.

All these routers us two or more satellites that are placed throughout your home. You can place anywhere according to your requirement. The mesh routers communicate with each other and use different radio frequencies to route traffic and keep speeds constant throughout your house. If you need further support or assistance in this regard, you can stay in touch with the experts available online.

How To Set up Netgear Wn2500rpv2 WiFi Range Extender?

Configuring Netgear Wn2500rpv2 Extender is anything but complicated, but make sure you have the details of the exact procedure. You just need to make sure that the extender and the router are close to each other to avoid any signal problem. Once you set up Wn2500rpv2 WiFi Range extender, you can move it to a new location.

Steps for Netgear Extender Setup:

  1. Turn on the WiFi extender and wait for LED to turn green.
  2. Search for Netgear SSID on your laptop and connect to it once found.

Note – You can use either the wireless utility or network manager utility on your computer to connect your devices to the wireless network of your extender.

  1. On your computer, open a web browser to configure your extender at http www mywifiext net if using a Windows PC or mywifiext local if using a Mac computer.
  2. As you configure your extender, you can download Netgear Genie on your computer and try to find your extender on the list of devices. Once found, select it.
  3. If you have enabled wireless security on your existing wireless network, then enter the password for the network.
  4. Enter the passkey to continue the setup process.
  5. If you aren’t able to find any wireless network within the range, then you should check if the main network if it is in range of the extender or not.
  6. If the WiFi Extender that you wish to configure supports the 5GHz band, then you need to choose 5GHz for your router as well.
  7. Click ‘Continue’.
  8. In case, the router doesn’t support 5GHz band, then you need to click ‘No, my router doesn’t support 5GHz band’ and click ‘Continue’.

If you are not able to create a connection between the extender and router, then here is what you can try:

  1. Check the password for your router.
  2. Place your extender and router close to each other. If you’ve enabled MAC access list on your router or if the MAC filtering is on, then you can enter MAC address on your extender right away.
  3. Turn off and on your extender to refresh the network. Perform the same on all your devices.
  4. Establish a connection between your extender and router. As you do so, you will be prompted to change the settings of your extender. You can skip the step of changing the settings for later.
  5. Click ‘Continue’.
  6. Wait for a couple of minutes until you see the ‘success’ screen. Your network will disconnect from your computer during this time.
  7. Verify all the settings if those are correct.
  8. Connect your Wi-Fi enabled devices to the extender.
  9. As your devices connect to the internet network established by the extender, go to ‘Genie’ screen and check the box corresponding to ‘My wireless device is connected to the extender network’
  10. Click ‘Finish’ and that ends the configuration process of your extender with your router.

You can now browse the internet without any issue. Should you come across any issue, then you can consult experts for the best solution.

Working From Home: WiFi Extenders Are An Easy Way To Boost Coverage

Work from home is the latest work culture that we all have been forced to follow due to COVID-19 breakdown. Our homes are overrun by technology amid lockdown. While adults are trying to cope up with their backlog of work on their personal computers, children are also trying to study via several apps like Google Hangouts, Zoom, and many more. It is quite disappointing to see the dining room table turning into an overgrown IT department.

If you have been working from home for all these weeks, then you must have realized that there are certain spots in the house where the Wi-Fi signals remain totally absent. If there are such spots in the house, then you need to find a way to eliminate them using the right devices. You have to understand that many issues stem from Wi-Fi dead spots, like everybody sitting near the router to get the best internet signals, and if that router is kept in your room, then everybody will remain there, disturbing your privacy completely.

If you want to overcome this problem, then you will have to use a WiFI Extender because this is the only device that can get rid of problems like ‘Wi-Fi dead spots’. Wi-Fi routers usually end up in the corner of the house because that’s where the cable comes in. Now, if you have a highly efficient router with the fastest internet service, you may not be able to get the Wi-Fi coverage everywhere because of the limited coverage.

WiFi Extenders come in all shapes and sizes, as some are large while others are small, but none of those things matter, as WiFi Extenders can easily spread the Wi-Fi signals to every nook and cranny of the house, provided it has 2-3 rooms because extenders too have limited coverage. It is very easy to set up WiFi Range Extender, and once the extender is set up, you will find a significant change in the Wi-Fi signals. You just need to plug the WiFi Extender into a standard outlet and rotate the antennas to pull in the signals from your current router followed by boosting it to the rest of the home. The process of setting up an Extender looks like this:

  1. Plug the extender into an outlet close to the router. Turn it on and wait until the power light comes on.
  2. After that, you need to connect your smartphone’s Wi-Fi onto the new WiFi extender followed by opening a web browser.
  3. After that, you need to create a password that will let you log into the extender. Then, you should select the Wi-Fi signal in your house that you wish to extend.
  4. Now, you need to type in your Wi-Fi password for the original router. A few seconds later, your Wi-Fi extender will be connected.
  5. You need to find a spot to plug in your new WiFi Range Extender, which should be away from the router.
  6. Extenders have an indicator light that lets you know about the placement of the extender whether it is too close or too far from the router.
  7. It is better to place the extender close to the router, but not beyond the edge of your current coverage.

That sums up the extender setup process and now, you will see all the dead spots being enlightened by the Wi-Fi coverage.