What Different Options Are Available For Enhancing The Range Of Home WiFi Signal?

All your online work or business depends on the internet. The faster it is, the lesser will be the time taken. However, the speed of the internet doesn’t remain constant throughout the house. For this, you can either use the range extender or extend the power line. The functioning of the range extender is dependent on its position and placement. Though the power line has advantages over the range extender, at the same time it is much expensive as compared to the range extender.

Understand how these devices work

When we perform the Netgear extender setup to connect it to the router of an existing network, then it strengthens the signal and expands it to the areas where there was the least signal earlier. The extender receives the signal from the router and re-transmit it. The router settings remained unchanged but with increased network strength.

As we have discussed the power line increases the signal strength through electricity. In this, there are two parts mainly, one part of which is connected to the router’s Ethernet, and the second one is connected to the place where you want to increase the coverage of your Wi-Fi.  The signal is then transmitted to the wires through the wires with the least interference. This ensures fast and reliable transmission between the devices. If you don’t know anything about powerline or range extender, then you must contact the experts.

Coverage area

The purpose of adding the extender to the network is to make the Wi-Fi signal possible in the dead zones or the dead corners of your house. A single router alone can’t provide the signal in all directions. So, this is where the extender comes to its place.

The placement of a device plays an important role when it comes to receiving a good quality signal. If you have placed the router in the living room, then the extender should also be placed in the same room. After the device gets configured, you can place the extender anywhere inside the home.

The power line on the other hand is recommended for having internet connectivity in a particular room. The signal through the power line is free from interference that occurs due to the walls or furniture. The average range of the powerline is approximately 300 meters.

Remember, don’t forget to check the quality of the internet available at home. The internet service provided by the internet service provider at home must be capable of delivering a min of 1 Mbps of data. If the speed of the internet is slow, then you have to go with a wireless range extender.

There are many range extender models available in the market. You need to select the one with more than one frequency band and 2 top antennas affixed.  There are many manufacturers in the market for range extenders but selecting the right brand can be a cumbersome project for an individual having limited knowledge. You can check the Netgear range extenders having the proper speed and coverage.

How To Configure The Wi-Fi Network Of An Extender Or Access Point To Automatically Connect To The Best Signal

When you opt for the Internet with a reputed ISP, they usually offer us a Wi-Fi router for free through which to connect both computers and other devices to the Internet, cable, and Wi-Fi. However, these routers, in general, are of very low range, so, in addition to not having many functions and being of very low performance, both the speed and the coverage of the Wi-Fi network usually leave quite a lot to wish.

While solving the problem of speed is quite complicated and happens to change the router or add another that takes care of Wi-Fi, if you are only interested in solving the problem of wireless network coverage. One of the simplest ways to solve it is by installing a WiFi extender or access point, a device that, placed where the router’s signal arrives well but begins to get lost, is responsible for repeating it so that it reaches the areas farthest from the router.

Depending on the device you install, it is possible that it directly copies the Wi-Fi data that must be repeated and forwards the signal as such, or that you have to configure the network manually to which you connect (Wi-Fi access point).

In the first case, you will not have to do anything, so simply connecting the device and linking it to the original router would already be repeating the signal with the same configuration as our router, however, if what you have installed has been a point of access, before making it work you must do the following.

How to create a Wi-Fi hotspot

The first thing to do is to access its configuration panel by connecting it directly by cable to the computer and accessing its IP from the browser.

Once inside the configuration panel, you must place yourselves on the Wi-Fi configuration section, and there you must configure the options as follows:

  • SSID or network name: The same on the router and access point.
  • Security, password, and encryption: The same on both devices.
  • Channel: Different on the router and access point.

Once you save the changes, you can see that now, although computers and mobiles show us a single network (the closest one), if you scan the wireless spectrum you can see that, in reality, there are two equal networks on different channels.

If you are using an Android/iOS smartphone or tablet, this device will automatically connect to the network that offers the best signal. If you are closer to the main router, you will connect to it, but if you move away, you will connect without having to walk to the access point. In case of using a Windows laptop, this system does not get along with network changes, so you will most likely have to disconnect and connect again to choose the network that arrives with the best signal depending on where you are.

If you configure the network incorrectly, although the configuration is most likely to work, surely you have two independent Wi-Fi networks so that you have to switch from one to another manually. This will happen if, for example, the two networks have different SSIDs or different passwords. If you configure them with the same channel, it will most likely not work since mobile devices will not know how to interpret the change.

WiFi Extender Or Mesh Router – Which Suits Your Requirements The Best?

A discussion has picked up regarding the difference between Wi-Fi Range Extender and Mesh Router with the inception of the latter into the tech world. A decade ago, when Wi-Fi Routers became prevalent, users were excited to access the internet without using any wires and cables, but then, the same users felt the need of internet in every nook and cranny of the house, hence gave rise to extenders.

WiFi Range Extenders were good; no… actually, they were great because they allowed users to connect to the internet from any corner of the house. The only downside to WiFi Range Extenders was their range, which wasn’t that great. A WiFi Range Extender is excellent in covering a small house with 2-3 rooms, but for bigger homes, the dead spots may continue to exist.

To overcome this problem, the bright minds of this world sat together and brainstormed on what new can be delivered to users to ensure uninterrupted internet connectivity throughout their homes without changing the network. This led to the discovery of ‘Mesh Router’, a revolutionary device, which can overcome the problem of dead spots in large homes. The functioning of mesh routers is very different from WiFi Range Extenders. Where the role of an extender is to boost the internet signal it receives from the router, Mesh Router on the other hand creates a seamless network all around the house.

A mesh router is not a single device, but it is a group of 3-4 devices out of which, one device works as a hub and other as nodes. You need to place the hub at a central location, whereas the nodes in all corners of the house, so as to cover the entire area with internet. A notable feature of the mesh router system is that you receive immaculate internet throughout the premises without changing the network, which means, you remain on a single network but receive the best internet signal from the closest node.

Which is better? A WiFi Range Extender or Mesh Router?

Well, both devices are used in different setups. Where a WiFi Range Extender is used for small houses, mesh routers are suitable for large houses. Moreover, the technology incorporated in mesh routers is more advance compared to what is included in WiFi Range Extenders. It all boils down to personal preference as to what a user really wants. Netgear offers the best of both worlds, i.e., it has the best WiFi Range Extenders as well as Mesh Routers, so you can consider getting a product of this company. Or, if you have another company in mind, then you can opt for it.

How To Get Most Out Of Your Netgear Wi-Fi Nighthawk EAX80 Mesh Extender?

With this post, we will try to make you understand the working of range extender and how they can be best employed. We are going to consider Netgear Nighthawk EAX80 mesh range extender in this post. Nighthawk series is considered as expensive and most-featured series of Netgear networking products. With AX8, 8 here refers to the capacity of the range extender to transmit the same signal to 8 devices at a time. Being a new Wi-Fi standard, it is currently being supported by limited Wi-Fi devices like Intel cards and Samsung S10 series phones. The range extenders mainly boost the existing network reaching your home from the internet service provider’s end. If you are receiving a signal up to 5 meters inside your home and want to reach it up to 10 meters, then you can go with a range extender that acts as an amplifier for the network.

Range extenders explained

In this modern world, most of our day to day work depends on the connectivity to the network. All the consumer durable we use either in office or at home requires a stable internet connection for optimal functioning, And this is possible only if there is equal signal strength distributed on all the devices at the same time. This is where the Wi-Fi extender comes into place, as it can handle multiple Wi-Fi devices simultaneously. If you employ EAX80, it can boost the signal of every standard router, no matters which brand the router is from. Let us explain the whole of working simply. If you are a senior citizen, then the speed requirements will be comparatively lesser than that of the photographer. The signal enters the home through the modem provided by the internet service provider. A basic router can transfer data at a rate of 100mbps.

How to use the wireless range extender like EAX80 in the best way?

Now, you must have understood what the range extender is, we would now suggest to you how you can use the range extender more efficiently. The simplest method to improve the signal strength of your Wi-Fi is by restarting the Wi-Fi router and plug-in back after some time and try connecting the Mesh Wi-Fi system instead of the normal extender.

Our technical experts have already tested and verified the performance of the AX8 nighthawk wireless router and find that it is offering the high signal strength in all the directions irrespective of a particular zone or area. You can use Wi-Fi 6 speed instead of using a slower 5/AC mesh system.

The Netgear Nighthawk AX8 or 6 is 6 & 8-stream mesh extender by Netgear will meet your expectations and you can easily come out of the situation where you are not being able to connect to the internet from different Wi-Fi devices. When you connect the Nighthawk WiFi 6 mesh extender to the power supply and the network port, it will start connecting to the existing network on its own. You don’t need to search for the router’s SSID manually. Once connected, you can get the same speed of network on all the floors of your house.

All-New Range Extender 1200 MBPS With Ethernet Port, Alexa, And Smart Devices Support

In the times of COVID Epidemic, the companies are trying their best by offering the products that can best suit the requirements. In the latest updates, the wireless range extender has been launched having 1200 Mbps data transfer speed. You can connect the smart devices like Samsung, PC, 4K streaming devices simultaneously with this range extender without compromising with the speed.

Coming to its characteristics or unique features:

  1. Universal compatibility: The most exciting feature is its universal compatibility. You can connect the extender to any router or AP, thus enhance the network strength for 2.4 GHz. The 1200 Mbps dual-band Wi-Fi is compact, reliable and can be easily configured. It even add aesthetics to your home décor.
  2. Easy to install: There’s a simple button given on the hardware named ‘WPS button’ by pressing which you can easily configure in 8 seconds. Another way of How To Set Up WiFi Extender  is by using the web-based setup which can be opened by entering the IP address on the internet browser. Once installed, you can place the range extender anywhere inside the home and start getting the proper signal strength in every corner of it. There’s an option to connect the Wi-Fi devices either wirelessly or physically with the extender.
  3. Eliminate dead zones: Usually, the router employed with the home network is not capable of covering the whole house or area of the floor. The restroom, garden, and balcony remained dead zone for the network. The new extender has a smart LED that helps you decide the placement of an extender at the best location. It supports WPA/WPA2 PSK and hidden SSID to avoid unauthorized access by hackers and strangers.
  4. Guaranteed satisfaction: In case you are not being able to set up or use the extender efficiently, then a team of professionals is available 24×7 for help and support. If you are having any problem or issue to discuss, you can reach through a toll-free number. They will try to satisfy the customer by putting their full potential in other words, you can say satisfaction is guaranteed.

How To Eliminate Wi-Fi Black Spots Around Your House?

Internet black spots are very frustrating during the lockdown because you want to send an email, post a status on Facebook or refresh your Twitter feed, but you can’t do any of these because of dead spots around the house. As if COVID 19 was not enough to annoy you, the absence of Wi-Fi signals is adding to your troubles.

When it comes to fixing the black spots, you can consider one of the following two solutions, which are a WiFi Extender or wireless mesh router. But, which solution is best for you? Let’s find out in this post.

Wi-Fi Router Placement

Before you proceed with the solution part, it is important that you should place the Wi-Fi router at the right spot. If you think your router is at the right spot, yet the internet is not working, then read on.

What is a mesh router system? And, what is a WiFi Extender?

Mesh Router system and WiFi Extender are the same things, but they work in slightly different ways.

WiFi Extender

A WiFi Extender picks up Wi-Fi signals originated from the router and passes them on to areas where internet signals used to remain absent. You can plug this device anywhere in the house and enjoy fast and seamless internet. The only downside to a WiFi Extender is that it behaves like a separate network, so your Wi-Fi enabled device has to switch from your main Wi-Fi to the extender with a different username and password. Moreover, there will be a drop in the signal as you go away from the extender.

Mesh Router System

This system involves multiple Wi-Fi Extenders, but they all are on the same network, thus letting you enjoy fast and seamless internet in all corners of the house without changing the username and password. Each mesh device connects to other mesh devices in the network instead of just going back to the main router as WiFi Extenders do.

A mesh network creates a much larger wireless footprint compared to a single router or the combination of router and extender. Your device comes to think as you have a large Wi-Fi area.

What is more suitable for you? WiFi Extender or Mesh Network?

Well, it depends upon your home and the way you want to use your Wi-Fi

Wi-Fi Extender is suitable for:

  1. Single-story houses.
  2. Small houses.
  3. Single Wi-Fi black spot.
  4. Few internet users.

There are many brands of WiFi Extenders available on the market, so you can buy the device that suits your requirements the best.

Wireless Mesh Network is suitable for:

  1. Old houses with thick walls.
  2. Multi-storeyed houses.
  3. Multiple Wi-Fi black spots.
  4. Multiple users.

You can also find a wide range of mesh routers on the market. If you need any assistance regarding the installation of the extender or mesh router, then you can get in touch with experts.

Can A Wireless Extender Help Reach Wireless Signals In Every Corner Of Your House?

The wireless router that comes with your internet service may not cover every corner of your house due to its limited range or connectivity. Almost in every house, there are dead spots where the Wi-Fi signal is approximately negligible or available with limited speed.

The placement of the router at the same time can’t be sidelined. Thus, if there are several walls or doors located in-between the router and the device, then the signal may not reach properly. If you move away from your router, the signal will continue to drop.

The router must be located in the center of your home but this is ideally not the case. If you have placed the router in some cabinet or closed surface, then take it out from there and place it in open.

If the Wi-Fi router is built into the internet service provider provided modem, then you can look for the wireless extender option, which creates additional Apps to help to reach the signal in every corner of the house.

Let’s discuss internet speeds. Don’t mix up slow wireless with a slow network plan.

What you are paying to the internet service provider is for getting the data at different speeds like if you opt for a 24 Mbps plan, then you will get a speed of 24 megabits per second. Likewise if you opt for 1000 Mbps, then you will get more speed at extra cost. You can’t get speeds faster than the one offered by ISP. If you are using the internet and your kids are playing games online, then the slow internet speed issue may encounter.

If you have subscribed for a high-speed internet pack and still getting the low signal, then you might be accessing the internet from an area with weak Wi-Fi coverage.

A range extender is a small device that plugs into the power outlet and extends the range of the internet in a particular area of your residence. It is recommended to use the same brand of the extender as your router. Check out more information on how to setup Wifi Extender to ensure strong and uninterrupted signals across the house.

There are several extenders available under $40 which can well enhance the range of the network. However, some of these can’t send or receive the signal at the same time. So, extenders work where internet access is limited or the price of the plan is low.

In best extenders, you will find multiple bands and radio frequencies to send and receive the signal simultaneously which can be better but not perfect. Some extenders even cost more than $100. You can consider the popular brands like Netgear, Linksys, Eero or Google for mesh Wi-Fi systems.

All these routers us two or more satellites that are placed throughout your home. You can place anywhere according to your requirement. The mesh routers communicate with each other and use different radio frequencies to route traffic and keep speeds constant throughout your house. If you need further support or assistance in this regard, you can stay in touch with the experts available online.

How To Set up Netgear Wn2500rpv2 WiFi Range Extender?

Configuring Netgear Wn2500rpv2 Extender is anything but complicated, but make sure you have the details of the exact procedure. You just need to make sure that the extender and the router are close to each other to avoid any signal problem. Once you set up Wn2500rpv2 WiFi Range extender, you can move it to a new location.

Steps for Netgear Extender Setup:

  1. Turn on the WiFi extender and wait for LED to turn green.
  2. Search for Netgear SSID on your laptop and connect to it once found.

Note – You can use either the wireless utility or network manager utility on your computer to connect your devices to the wireless network of your extender.

  1. On your computer, open a web browser to configure your extender at http www mywifiext net if using a Windows PC or mywifiext local if using a Mac computer.
  2. As you configure your extender, you can download Netgear Genie on your computer and try to find your extender on the list of devices. Once found, select it.
  3. If you have enabled wireless security on your existing wireless network, then enter the password for the network.
  4. Enter the passkey to continue the setup process.
  5. If you aren’t able to find any wireless network within the range, then you should check if the main network if it is in range of the extender or not.
  6. If the WiFi Extender that you wish to configure supports the 5GHz band, then you need to choose 5GHz for your router as well.
  7. Click ‘Continue’.
  8. In case, the router doesn’t support 5GHz band, then you need to click ‘No, my router doesn’t support 5GHz band’ and click ‘Continue’.

If you are not able to create a connection between the extender and router, then here is what you can try:

  1. Check the password for your router.
  2. Place your extender and router close to each other. If you’ve enabled MAC access list on your router or if the MAC filtering is on, then you can enter MAC address on your extender right away.
  3. Turn off and on your extender to refresh the network. Perform the same on all your devices.
  4. Establish a connection between your extender and router. As you do so, you will be prompted to change the settings of your extender. You can skip the step of changing the settings for later.
  5. Click ‘Continue’.
  6. Wait for a couple of minutes until you see the ‘success’ screen. Your network will disconnect from your computer during this time.
  7. Verify all the settings if those are correct.
  8. Connect your Wi-Fi enabled devices to the extender.
  9. As your devices connect to the internet network established by the extender, go to ‘Genie’ screen and check the box corresponding to ‘My wireless device is connected to the extender network’
  10. Click ‘Finish’ and that ends the configuration process of your extender with your router.

You can now browse the internet without any issue. Should you come across any issue, then you can consult experts for the best solution.

Working From Home: WiFi Extenders Are An Easy Way To Boost Coverage

Work from home is the latest work culture that we all have been forced to follow due to COVID-19 breakdown. Our homes are overrun by technology amid lockdown. While adults are trying to cope up with their backlog of work on their personal computers, children are also trying to study via several apps like Google Hangouts, Zoom, and many more. It is quite disappointing to see the dining room table turning into an overgrown IT department.

If you have been working from home for all these weeks, then you must have realized that there are certain spots in the house where the Wi-Fi signals remain totally absent. If there are such spots in the house, then you need to find a way to eliminate them using the right devices. You have to understand that many issues stem from Wi-Fi dead spots, like everybody sitting near the router to get the best internet signals, and if that router is kept in your room, then everybody will remain there, disturbing your privacy completely.

If you want to overcome this problem, then you will have to use a WiFI Extender because this is the only device that can get rid of problems like ‘Wi-Fi dead spots’. Wi-Fi routers usually end up in the corner of the house because that’s where the cable comes in. Now, if you have a highly efficient router with the fastest internet service, you may not be able to get the Wi-Fi coverage everywhere because of the limited coverage.

WiFi Extenders come in all shapes and sizes, as some are large while others are small, but none of those things matter, as WiFi Extenders can easily spread the Wi-Fi signals to every nook and cranny of the house, provided it has 2-3 rooms because extenders too have limited coverage. It is very easy to set up WiFi Range Extender, and once the extender is set up, you will find a significant change in the Wi-Fi signals. You just need to plug the WiFi Extender into a standard outlet and rotate the antennas to pull in the signals from your current router followed by boosting it to the rest of the home. The process of setting up an Extender looks like this:

  1. Plug the extender into an outlet close to the router. Turn it on and wait until the power light comes on.
  2. After that, you need to connect your smartphone’s Wi-Fi onto the new WiFi extender followed by opening a web browser.
  3. After that, you need to create a password that will let you log into the extender. Then, you should select the Wi-Fi signal in your house that you wish to extend.
  4. Now, you need to type in your Wi-Fi password for the original router. A few seconds later, your Wi-Fi extender will be connected.
  5. You need to find a spot to plug in your new WiFi Range Extender, which should be away from the router.
  6. Extenders have an indicator light that lets you know about the placement of the extender whether it is too close or too far from the router.
  7. It is better to place the extender close to the router, but not beyond the edge of your current coverage.

That sums up the extender setup process and now, you will see all the dead spots being enlightened by the Wi-Fi coverage.

WiFi Extenders: How To Pick And Set Up The Right One

Trouble streaming Netflix or your favorite OTT app? Well, this could be due to the Wi-Fi dead zones in your home. Maybe you are living in a house that is big enough for Wi-Fi signals to die down trying to reach from one corner of the house to another. If your house is spacious, then that’s great, but you are then bound to face such Wi-Fi related issues. But, since you are living in the 21st century, you don’t have to adjust yourself when you can adjust your tech gadgets to deliver you things that you really want.

WiFi Extenders – A Possible Solution To ‘Dead Zones’ Issue

If you are experiencing dead zones in your house, then you can buy a WiFi Extender to get rid of that problem once and for all. A WiFi Extender connects to the network that your router is providing and spread it further to those areas where Wi-Fi signals used to get low or completely die down. You have been thinking that how did Wi-Fi signals begin to go weak, creating dead zones in the house when you’ve been using the same router for years.

Well, you need to understand that your router too undergoes wear and tear, so if you are using the same router for 4-5 years, then you should replace it. Or, if you don’t want to do that, then make sure that it is properly placed in the house to deliver Wi-Fi signals to far off rooms.

Secondly, you need to check if thick walls and metals are interfering with the signals because if they do, then you may experience problems with the internet. Also, there shouldn’t be too many electronic devices close to the router because their radiations can interfere with Wi-Fi signals.

Which WiFi Extender should you get?

If you have done your due diligence and gotten to the conclusion that Netgear WiFi Extender is what you need to get for your home, then that’s a great decision. Extenders from this brand are doing exceptionally well in the market, plus the support is also top-notch. If you need any help related to the Netgear Extender setup, then you can get it from here. You need to make sure that the extender is set up properly, or else, the problem you are facing with the Wi-Fi signals continue to remain as it is. The best thing about Netgear WiFi Extenders is that you can remotely control them through the Genie app. This app is free to download on Android and iOS devices and once you install it and configure your extender on it, then you will be able to set up parental controls, manage and troubleshoot Wi-Fi network and much more.

Where should you put it?

The placement of a WiFi Extender is of paramount importance because if it is placed in an area where it can’t get the signals from the router, then it won’t be able to eliminate dead zones. So, it needs to be placed within the range of the router and the room(s) where you are not being able to access the internet wirelessly at all.

How should you set it up?

To set up your WiFi Extender, you need to press WPS buttons on both your extender as well as the router because that’s how they’ll establish a connection. If there is an Ethernet port on the extender, then you can connect the router using an Ethernet cable, which by the way gives you faster and more reliable internet signals.

For any issue related to the Netgear WiFi Extender setup, you can get in touch with experts.