Wifi Range Extender Or Mesh Router – Which Suits Your Home Network The Best?

With most people spending time at home these days, the requirement of the internet has risen exponentially, as everybody needs the internet to keep themselves entertained at this time of global emergency. People are forced to work from their homes using their computers and they require the internet at all times. With most homes having Wi-Fi networks, there is a problem that has come to the fore, which was somewhat hidden when things were normal.

The problem is that the Wi-Fi signals are limited to certain areas and people sitting beyond those areas are not able to access the internet. If you too are experiencing this particular issue, i.e., dead zones in some spots of your house, then you have a few options to eliminate dead zones such as WiFi Range Extender or Mesh Router, which has its own range-extending satellite devices known as nodes.

WiFi Range Extenders are the cheap and best option for smaller spaces, but if you have a big home, then you will have to opt for a mesh router because they can offer a comprehensive coverage through their nodes, which you can strategically place in different areas of the house. The only thing that matters in wireless networking is ‘Location’ because the wireless access points can only put out a network signal, which is equally strong as the incoming wireless signal that is being received from the router.

The best way is to check at the speed test data and then, finding the room closest to the dead zone where the internet signals are good. Doing this will help you find the right place for having the extender to cover the dead zone. It is always great to run a test speed on your network to know how much speed you are getting.

Use WiFi Range Extender for small dead zones

If you are living in a small house with two rooms, then you just need a WiFi Extender to extend the range of your wireless signal, and you can easily get an extender online. Check out the steps to know how to set up a WiFi Extender. Before buying an extender, just make sure it has the WPS button because that makes the setup process a lot easier. The drawback in almost all WiFi Extenders is that they don’t get to the max speed of your internet network, so you are going to get 50Mbps – 75Mbps, which is sufficient for online HD streaming, playing online video games and do other tasks. Just keep in mind that you need to find the room closest to the dead zone with the best internet signal because you’ll place the extender at that spot.

Use Mesh Routers for whole-home coverage

If there are multiple dead zones in your house, then you have to get a mesh router, which comes with nodes that you can place in different spots of the house to ensure that the entire house receives the best internet signals. The software of these mesh routers has a huge role to play in the functioning and setting up the algorithms to calculate the best way to route your connection as per your movements in the house. As you move from the range of one node to another, the premium-quality mesh router will automatically transfer your network to the strongest node without letting you know.

It is now up to you to decide whether you need a WiFi Extender or a mesh router. There is obviously a price difference between the two, as an extender will cost you 5x less than what a mesh router will, but then, the requirement plays a major role because an extender may not be able to cover a large house.

How To Access Internet Via Netgear WiFi Extender During Coronavirus Lockdown?

COVID-19 or Coronavirus as it is popularly called has brought the whole world on its knees. The entire world is under lockdown with thousands of people dying every day. The only way to work is by staying at home, which is why the importance of the internet has risen exponentially. I’m not saying it wasn’t before, but the internet is more important today than it ever was, as it is the only source of doing business or should I say, retaining business for people until the SARS CoV-II virus fully vanquishes.

The good thing is that in most parts of the world, the internet speed and quality are at satisfactory levels. At the same time, it can also be said that businesses that used to be carried out over the internet are the ones that are still being carried out, while others are being in shambles.

If you too are forced to sit inside your house and work on the internet, then that is better than sitting idle at home. However, many users are facing issues while accessing the internet due to signal range related issues. As many people only have routers at homes, which have a limited range, the issue is quite common to arise. If you want to get rid of this issue, then you got to install a WiFi Extender to extend the range of the Wi-Fi signals. You can buy N300 Extender because of its easy setup and incredible range and consistency. To know how to the steps for the Netgear WiFi Extender N300 setup, you can follow this link. The process is very simple and can be performed even by non-technical people.

When it comes to setting up an extender, you must keep in mind that there is a software aspect of the process as well. You will have to download Netgear Genie followed by performing Netgear Genie Smart setup, which involves entering the user credentials.

You need to know that Netgear Genie setup allows you to manage and control your extender in the easiest of ways, so make sure you have the app installed on a device where you can easily access it. Once you have configured your extender with Genie app, you can connect your devices with the extender’s network and you shall surf the web without any issues. Should you come across any issue, then you can get in touch with experts for quick and reliable assistance.

Answering Questions Related To Extender, Genie App, Default IP And Much More

How To Login To Extender After Performing Netgear Genie Smart Setup Wizard?

Once you have configured your extender with Genie Smart Setup Wizard, you can easily login to extender by using the username and password given on the extender device. If those details are not working, then you should click here.

Router Is Using WEP Security Protocol, Can I Connect My Extender To The Router Using WPS Method?

WPS is a much better security protocol that makes use of complex passwords to safeguard a network, whereas WEP is an older technology that is susceptible to hacking. So, if your router’s security is WEP and you want to use the WPS method to connect your extender to the router using WPS, then you will have to make changes in the Netgear Genie app. For more details, click on this link.

What Is The Process Of Configuring Your Netgear Wifi Extender N300 Using The Netgear Installation Assistant?

There are different ways of configuring WiFi Extender N300, and if you have opted for the installation assistant method, then you must have a LAN cable and a working internet connection to follow the steps, details of which you can find on this webpage.

How To Access is the default IP address of Netgear Extender and if you want to setup your extender properly, then you must access the web interface of the extender, which you can access by entering www.mywifiext.net or www.mywifiext.local for Windows and Mac computers respectively. If both URLs are not working, then you should enter in the address bar. To know more, click here.

7 Reasons Why Your Netgear WiFi Range Extender Not Setting Up

There could be dozens of reasons for not being able to set up a WiFi Extender, but if you want to know the 7 most common reasons along with their solutions, then you should check out this link.

How To Setup Netgear Wifi Extender?

If you want to enjoy fast and uninterrupted internet in every nook and cranny of the house, then you must know how to properly set up Netgear WiFi Extender. There is a certain process that you need to follow, details of which, you can find by going to this site.

How To Configure Netgear Range Extender Using Netgear Genie Smart Setup?

If you want to control your extender from your smart device, then you have to configure it without Genie Smart Setup. There is a series of steps that you need to perform to configure extender with Genie, which you can take a look at by going to this link.

Getting Problem Connecting The Netgear Range Extender To iPhone?

If you are unable to connect your WiFi Range Extender to iPhone, then you might be entering the wrong password for the network. Or, there could be some other issue with the extender or the network. Whatever the issue, it can be easily fixed by visiting this link.

How To Get Fast And Reliable Internet In Every Corner Of The Room?

If the internet is not available in every corner of the room, then there is no benefit of buying an expensive internet plan. If there are areas in your house or office where internet signals are absent, then you should install a WiFi extender. To know how to get fast and reliable internet, click here.

How To Download And Setup Netgear Genie App?

Check out the steps on how to download and setup the Netgear Genie app. Without this app, managing your extender will be very difficult, so make sure you get this app on your smart device.

How To Install Netgear Ex2700 With Firmware Above

To ensure the proper functioning of your Extender Ex2700, you must check the firmware version of the device. If it is working on a firmware below, then you should check out this link to know how to install Netgear Ex2700 with firmware later than

A Few Important Questions Answered Related To Wifi Range Extender

How To Get Rid Of Login Problem Of Netgear Range Extender?

To fix login problem in WiFi Range Extender, you must ensure that the username and password are correct. If the details are correct, then make sure that the internet connection is working properly. In case, both login details and internet connection are working properly, yet you’re not able to login, then you should ask experts for assistance. For that, click here.

How To Connect The Netgear Range Extender To Xbox 360 Gaming Console?

Net Gear Extender can connect to a wide range of operating systems, which include Xbox 360 Game Console as well, but there are certain steps that you need to perform, details of which you can get after clicking on this link.

How To Configure WN2500 Wireless Range Extender?

WN2500 wireless Range Extender is one of the most popular extenders that are used by thousands of customers. If you are looking to configure this extender, then you should follow the steps provided on this webpage.

How To Configure Your Netgear Wifi Extender N300 Using The Netgear Installation Assistant?

The process of configuring Netgear Extender N300 using Netgear installation assistant involves doing basic setting up of the extender and then, going to www mywifiext net link on the web browser of computer and make changes there. To know more about this process, you can visit this link.

How To Enhance The Signal Strength Of Network Using The Netgear Range Extender?

An extender is meant to enhance the strength and range of internet signal, but that can only be done if the extender is set up in the right way. To know the exact steps of setting up and configuring a Wi-Fi extender, follow this weblink.

How To Setup The Netgear Ex2700 In Bridge Mode?

Netgear Ex2700 can be set up in bridge mode, which is done to eliminate the need of placing the extender close to the router. To set up your extender in bridge mode, you need to follow certain steps, details of which you can find by going through this link.

What To Do If The SSID Of Range Extender Is Not Detected By Wireless Devices?

If you are dealing with this particular problem, then you need to refresh the extender setup page. Also, go through the settings of your extender to see if all the devices that you have connected to the extender are actually connected or not. In case, everything is fine, yet the issue persists, then click here to find the right solution.

How To Get Rid Of Netgear Login Problem If Not Accessible Through Mywifiext.Net?

Not being able to access the default address of extender is indeed a big problem, but it is not that common to see mywifiext.net link becoming inaccessible. If you are not able to log into the web interface of your extender, then visit this website to fix the issue.

Steps For Netgear Genie Smart Setup?

Netgear Genie is a software that allows you to configure multiple extenders for better control. Moreover, you can manage and control all your extenders from a single platform named Netgear Genie. However, to do all that, you must know the steps for Netgear Genie Smart Setup for which, you can check out this page.

How Do I Set Up My NETGEAR Wifi Range Extender N300 Setup?

To be able to set up a Wi-Fi Extender successfully is a big thing, as it gives you the opportunity to access the internet in any nook and cranny without any issue. If you want to know how to set up N300 Extender in the simplest of ways, then follow this link.

Frequently Asked Questions About Mywifiext.net, Netgear Extender & Genie

Troubleshooting Issues Connecting To mywifiext.net?

Mywifiext.net is a local address and not a regular internet website. It is used to open the settings of Netgear Genie or Smart Wizard. If mywifiext.net is not connecting, then check if you are connected to the internet via an Ethernet cable or wirelessly. If you are still not able to connect to mywifiext.net, then click here.

How To Login Netgear Wifi Range Extender?

To login to your Netgear WiFi Range Extender, you need to visit www.mywifiext.net or www.mywifiext.local in your address bar if you are using Windows or Mac computers respectively. Alternatively, you can enter in the address bar as well. Enter values in the username and password fields, which you can find at the back or bottom of the extender. If you are experiencing issues while logging into your extender’s web interface, then check this link.

How You Can Access

The default IP address of your Netgear WiFi Extender is, and if you are not able to access it, then make sure that the extender is properly configured with the router. Also, check that the internet connection is active on the extender. If you are still not able to access this IP address, then click here to know more.

How To Fix Problem Of Connecting Mycloud To Netgear Ex2700?

After you configure Netgear Ex2700 properly, you can easily connect MyCloud with it, but in case, you are facing issues doing the same, then you need to identify the reason(s) behind the problem. To know more about the problem, check out this link.

How To Configure Wifi Extender Using Netgear Genie App?

Netgear Genie app is a specially designed application dedicated to controlling WiFi Extender. But, in order to manage and control your extender through the app, you should configure it first. There are some easy steps to configure Genie with Extender, details of which, you can get by opening this link.

How Can You Find The Steps For Netgear Extender Setup?

In order to enjoy the functionality of the Netgear Extender, you must set it up in the right way. While there is nothing complicated when it comes to Extender setup, but yes, you will have to follow certain steps. To know details about those steps, click here.

How To Configure The Netgear Range Extender N300 Using The Web GUI?

You need to configure your extender with the help of web GUI to easily manage and control the device. If you want to know the exact steps of configuring Extender N300 using Web GUI, then click on this link.

How Do I Setup My Netgear Genie Extender?

Follow this link to find out the exact steps for setting up Netgear Extender in the most suitable way. In case, you encounter any issues during the setting up process, then you can reach out to experts for the best assistance.

10 Most Common Questions Related To Netgear WiFi Range Extender

Will Netgear wireless extender work with my existing router?

Netgear WiFi Range Extenders being universal extenders are compatible with the majority of routers, regardless of their manufacturers. Netgear WiFi Extenders work on both 2.4 GHz and 5 GHz bands, so if your router works on 2.4 GHz band, even then, you will be able to use the extender with it, although the speed and range may get affected.

Where to place my Netgear Wireless Extender?

The ideal location for an extender will be between your router and computer, but make sure to place the extender within the wireless range of the wireless router.

What to do if I am not able to log into my Wireless Range Extender?

If you are not able to log into your Wireless Range Extender, then you can get the details of how to troubleshoot problems with the extender log in by going to this link.

How do I setup my WiFi Range Extender?

Setting up Netgear WiFi Range Extender is a very simple process, but if you are not able to set it up, then you can follow this link to set up your extender in the right way.

What are the default username and password to log into Extender’s settings page?

The settings page of Netgear WiFi Extender can be accessed by entering www.mywifiext.net in the address bar if using a Windows device, whereas if you are using a Mac device, then use www.mywifiext.local. The default username would be ‘admin’, whereas the password would be ‘password’.

Why should I always have the latest FIRMWARE on Netgear Extender?

It is extremely important for you to have the latest firmware installed on your extender to ensure its stability and proper functioning. To know how to get the latest firmware on your Netgear Extender, click here.

I connected to NETGEAR_EXT followed by launching a web browser, but I can’t see Netgear Genie?

To fix this problem, make sure that the computer is set up to use DHCP. Then, keep in mind that wireless device to extender has a solid green light and you must have a valid IP address. Now, you should relaunch your web browser followed by typing www.mywifiext.net or For more details, contact us at My WIFi Ext FIX.

What if the Netgear Extender disconnects while you’re connecting to the main router during setup?

If this happens, then change the wireless settings of the main router. If that doesn’t help, then re-flash the firmware of the extender and router.

Can I use WPS method for connecting Range Extender to Route network when the router security is WEP?

If you’re using WEP security, then you are going to need to follow the process using the Netgear Genie setup because WPS supports WPA/WPA2 security. For more details, click here.

Can I add more than one Range Extender to my Router network?

Yes, that is, in fact, possible, but it is better not to create a daisy chain of extenders as it can affect the performance of client devices connected to the second extender in the queue.

What Fundamental Settings Are Must To Configure On Your Netgear Range Extender?

There are multiple settings available when it comes to configuring a range extender on the network. Out of all these, some fundamental settings are a must to ensure the proper functioning of the extender. We are going to shed light on these basic settings in our post. You must pay close attention to every step.

Some standard values are used and pre-defined in the radio settings of the router. Apart from this, different protocols and modes are available for wi-fi. You can use an 802.11g router instead of 802.11b for improving the performance and speed of range extender.

The channel number of an extender is just a frequency band that it uses for communication with other devices. The available channel numbers are 1 to 11. By default, these routers are set to 1, 6 and 11. But if you want you can change to avoid any interference.

All the extenders have their SSID which is used to connect the wireless devices to it. You can change the default SSID and password if more than one router or extender is configured at the same place.

Connection settings for routers

When you buy an extender, it comes with pre-defined settings that can help to connect to the home network.

Connection type

As the name implies, the connection type for different types of modems and internet service is different. All the routers have their connection type and administrator details to log in to.

The name of the connection type is based on the topology used. Otherwise, the most common ones are Static IP, PPoE, IP, PPTP, and L2TP.

Internet username and password

When you take services from any internet service provider, they allocate the username and password to the customers through which they can log in to the internet settings. Similarly, the router manufacturers also provide the login details to the user for changing the settings of the router.

Security settings for home Netgear extender

Change the SSID’s password immediately after configuring the extender. It will help to protect the network from being used by unauthorized persons. No hacker can access the network if he doesn’t know the login password. If you keep the default username and password then that can be easily guessed through the device manufacturer website.

From the ‘Wireless settings’ go-to ‘Security mode’ and click on ‘Wi-fi key’. Here you need to select the Authentication type depending on the options available. The security modes are different for different models of the range extender. The best and most recommend security mode is WEP-PSK and the basic one is WPA.

This is all about the basic settings of your range extender that are must understand and configure on it. We hope you have understood all the points and must try on your own. In case you are getting a problem in using the basic settings or want to know more about the extender setup, then contact the Netgear experts available at mywifiext fix. The team of experts is quick and dedicated to solving the problems of customers in the first go.

Do You Really Lose Signal Strength With A Wi-Fi Extender?

A Wi-Fi extender is a special device that extends the signal it receives from the router it is configured with. A wireless router sends data over radio waves instead of cables. Radio waves are also known as a signal, and the extent to which this signal reaches in all directions is known as its presence. The distance from the router to the edge of the footprint is its range. A wireless extender makes the signal from a Wi-Fi router available over a greater distance. The extender is a complete device itself and doesn’t require to be hooked up with the router with a cable.


A Wi-Fi extender is like a Wi-Fi router but without any processing power. It does not have any software that allows it to handle data that passes through it. The extender does not interpret or examine any of the signals it is processing and is not built to clear a signal by removing interference. It simply renews the signal to cover the same distance again.


Most Wi-Fi routers are “Omni-directional.” Their footprint is a sphere with the signal reaching an equal distance in all directions. Most householders put their router over by a wall because it needs to be connected to an electrical outlet and or a telephone outlet that is to say near a window (if it is receiving wireless Internet). This means that almost half of the signal footprint leaves the house. The extender works, widening the fan in one direction. It needs to be within the range of the router so that it can receive and send signals to it, and is best placed within the edge of the router’s signal footprint. The range of the router’s signal is, therefore, slightly less than doubled in one direction


Wireless extenders have their own signal footprint like a router’s footprint, and it is omni directional. If visible, seen from above, the two signal intervals would look like an oval. A wired compatible computer within the range of the outer side of the repeater’s footprint can communicate with the router although it is outside the router’s signal footprint. Any signal received by the extender is immediately re-transmitted, so that the router, within the range of the extender, receives the signal from the computer out of range. Likewise, all transmissions from the router are re-transmitted by the wireless extender, which means that a computer outside the router’s signal range, but within the extender’s footprint, can receive the signal.

Misconception about the extenders

A common misconception about wireless extenders is that they indiscriminately repeat everything in all directions. This means that the router immediately receives its own signal, as do all computers that transmit in the extender range. It does not weaken the signal strength of the router, but it doubles the traffic within the repeater’s footprint. For more information check out the link. Since Wi-Fi transmitters have to wait for silence on a frequency channel, the Wi-Fi extender can decrease the performance of a wireless network.

How To Configure A NETGEAR 834B As A Wireless Extender

Are you looking to extend the coverage area of your internet network to what your router is covering right now, then you can buy a Wi-Fi Range Extender and set it up using the steps provided on the web. Netgear WiFi extenders are the most efficient devices when it comes to extending the range, but make sure to go about the Netgear Extender Setup process in the right way. In case, you have a couple of routers, which you no longer use, then you can configure them to work as an extender. Want to know how that is done? Well, read the information that follows next.

The router we have taken for the process is Netgear Range Max WNR834B wireless router. One router acts as a “base station”, while the other acts as a wireless extender, passing along information sent by the base station to computers connected to it. Both routers must be properly configured to use one as a wireless extender. For best results, use two Netgear 834B wireless routers.

Things You’ll Need:

  1. Two Netgear 834B Wireless Routers
  2. Ethernet Cable

Steps to convert Netgear 834B wireless router into a WiFi Range Extender:

  1. Connect an Ethernet cable to a numbered Ethernet port on the 834B router you want to use as a wireless base station.
  2. Open a browser window and type “” in the address bar to access the login screen for the Netgear router’s configuration page.
  3. Enter the administrator’s username and password. The default username is “admin” and the password is “password.” By default, the router checks and installs firmware updates after you log in.
  4. Click on “Wireless Settings” in the “Configuration” section. Make a note of the wireless network name, the channel and what the wireless network security option uses. If the channel is set to “auto” – choose a specific channel, no matter what.
  5. Click on “Wireless Repeat Function” in the “Advanced” section of the panel on the left side of the window.
  6. Make a note of the wireless router’s MAC address near the top of the window, and check the “Use Router as DHCP Server” box. Click “Apply”.
  7. Click on “Setup LAN IP” under “Advanced”. Make a note of “IP Address”, “IP Subnet Mask”, “Starting IP Address” and “Final IP Address.”
  8. Close the browser, disconnect the Ethernet cable from the base station router, and connect it to the router you want to use as a wireless extender. Log in to the router, using the process described in steps 2 and 3.
  9. Go to “LAN IP Configuration” in advance, check the “Use Router as DHCP Server” box and enter the IP address, IP subnet mask, and starting and ending IP addresses that you noted earlier. Click “Apply”.
  10. Go to the “Wireless Settings” page on the router and enter the network name of the wireless base station, channels and security options you wrote down. Click “Apply”.
  11. Go to “Wireless repeat function” under “Advanced”, and make a note of the wireless router’s MAC address.
  12. Check the “Enable Wireless Function Repeating” box, type the base station’s IP address into the “extender IP Address” box, and the base station’s MAC address in the “Base station MAC address” box. Click “Apply”.
  13. Close the browser window, disconnect the Ethernet cable from the 834B router you just configured to act as a wireless extender, and plug it back into the router you are using as a wireless base station.
  14. Open a browser, log in to the base station router, and go to the “Wireless Repeat Function” again.
  15. Click on the “Wireless Base Station” radial button and enter the MAC address of the wireless extender you wrote down earlier. Click “Apply”.

This is how you can configure two Netgear routers to work as a Wi-Fi Range Extender. In case, you come across any issues while performing the process, then you can always get in touch with Netgear Extender support providers.

Why Should You Invest In Nighthawk X4 Netgear Wi-Fi Range Extender?

Netgear holds the distinction of being the first company to launch a wall-plug Wi-Fi Range Extender. Netgear has launched X4 WiFi Range Extender, which is capable of streaming high-definition multimedia at speeds greater than 2 GBPS. Let’s take a look as to what more you can expect with this incredible device.

Nighthawk X4 WiFi Range Extender offers coverage of around 10,000 square feet, which is just incredible compared to other extenders, which cover only half the area. Apart from huge coverage, the Wi-Fi Range Extender features MU-MIMO and Beamforming+ technology, which expands the current range of your router to over 10,000 square feet. Along with that, you can stream data to multiple devices at a lightning-fast speed of 2 GBPS.

Being the first premium wall-plug extender,it portrays the ability of Netgear to develop products with enhanced network accessibility, performance,and Wi-Fi range. When it comes to setting up this device, then you can use it using mywifiext net login link.

Extend the internet range in your house with this WiFi Extender!

While it is great to access the internet wirelessly, but the limitations on the internet range annoys people greatly. Routers have made a revolutionary change in the way people access the internet, but routers can’t propagate internet signals too far. Hence, some areas of the house remain deprived of the internet signals, creating dead spots. To enjoy fast and seamless internet in the room of your choice, you must buy a product like Wi-Fi Extender because this product is the only way how you can extend the range of the internet signal without any deterioration.

Why Nighthawk X4 Netgear WiFi Range Extender is so special?

Well, let’s begin with the hardware of the product, so it consists of four internal antennas optimized to deliver excellent performance to even the most advanced mobile devices working on 802.11ac. It also supports older Wi-Fi devices, so you don’t have to dispose them off.

With an incredible coverage of 10,000 square feet, you will be able to enjoy the internet in any room of your house, on the roof, in the garage and other places unless they are within the 10,000 square feet of distance from the extender. It isn’t just the coverage, which is great, but the speed offered by this extender is mind blowing too. With a speed of 2.2 GBPS, you can stream HD content on multiple devices at a time without any buffering.

Here are some other key features of this Wi-Fi Range Extender:

  1. It comes with MU-MIMO Support, which means, it can do multitasking and stream data to multiple devices at once.
  2. The unit features Fastlane Technology, which allows it to use two Wi-Fi bands simultaneously to establish one super-fast wireless connection.
  3. To improve the wireless range and reliability of the Wi-Fi signal, the device incorporates the Beamforming+ feature. This allows it to transmit data to mobile devices instead of broadcasting the signal to a larger area.
  4. A low-noise amplifier has been included in the product to improve the quality of transmissions obtained from mobile devices. The Wi-Fi signal will reach the devices that are kept at some distance.

When it comes to configuring this extender, you can go to the same www mywifiext net link. Or, you can enter in the address bar, which will take you to the Netgear Extender setup wizard page from where you can configure the extender properly.